mars-tech

20 mm Internal grooving bar MGMN300 insert pack of 1

Mars-Tech 20 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 25 MM TMAX 6 MM Internal Grooving bar has different sizes this is suitable to MGMN INSERT 3 MM Suitable to KORLOY OR EQUIVALENT Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

Mars-Tech 20 mm ZCMT10 Insert cutter ... ₹ 1,805.00

NOTE: 16mm has 2 pockets. Product Description SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand has the same insert you can use it for this cutter.

Mars-Tech 200 mm APMT16 cutter ₹ 13,541.00

200 mm cutter suitable to APMT1604 60 mm flange type hole with 4 pcd holes

Mars-Tech 200 MM Milling Indexable Mi... ₹ 13,541.00

This 200 mm Cutter is for face milling Facemill holder used in this cutter is PCD type This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

20mm ball nose suitable insert 10r insert pack of 1(insert not include)

Mars-Tech 20mm ball nose suitable ins... ₹ 4,130.00

SUITABLE TO DIJET INSERTS FULL ROUND INSERT BALLNOSE

Mars-Tech 20mm boring bar ccmt09 pack... ₹ 1,003.00

20mm boring bar ccmt09 pack of 1CCMT BORING BAR ENTRY DIA IS 25 MM OF THIS BAR SHANK IS 20 MM SUITABLE TO CCMT09T3 INSERT OF ANY BRAND LENGTH OF THIS BORING BAR - 200 MM SUITABLE SCREW 4x8 TORX KEY - T15

Mars-Tech 22 mm Indexable Inserted En... from ₹ 1,143.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machi with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

Mars-Tech 25 mm boring bar ccmt09 pac... ₹ 1,593.00

25 mm boring bar ccmt09 pack of 1CCMT BORING BAR ENTRY DIA IS 32 MM OF THIS BAR SHANK IS 25 MM SUITABLE TO CCMT09T3 INSERT OF ANY BRAND LENGTH OF THIS BORING BAR - 250 MM SUITABLE SCREW 4x8 TORX KEY - T15

25 MM ccmt boring bar suitable to ccmt1204 right / left hand pack of 1

Mars-Tech 25 MM ccmt boring bar suita... ₹ 1,416.00

25 mm CCMT boring bar comes in CCMT09T3 and CCMT1204 this one is for 1204 only. CCMT boring bar are generally used for boring application

25 mm Indexable Inserted Endmill shank 25 mm

Mars-Tech 25 mm Indexable Endmill Sha... from ₹ 1,264.00

25 mm Indexable Endmill Shank25 Mm 2 Pocket Suitable To APMT1604This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech 25 mm Indexable Inserted En... from ₹ 1,204.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

25 mm Internal grooving bar MGMN200 insert pack of 1

Mars-Tech 25 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 30 MM TMAX IS 5 MM Internal Grooving bar has different sizes this is suitable to MGMN INSERT 2 MM Suitable to KORLOY OR EQUIVALENT Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

Mars-Tech 25 mm ZCMT10 Insert cutter ... ₹ 2,166.00

25 mm ZCMT10 Insert cutter 200 mm long pack of 1Note: 25 MM body has 3 Pockets. Product Description SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides,this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand have same insert you can use for this cutter.

Mars-Tech 25mm aomt184808 2 Pocket Mi... ₹ 1,866.00

25mm aomt184808 2 Pocket Mitsubishi Insert pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use AOMT184808 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

28 mm Indexable Inserted Endmill Shank 25

Mars-Tech 28 mm Indexable Inserted En... ₹ 3,250.00

28 mm Indexable Inserted Endmill Shank 25 dia 28 Mm 2 pockets Suitable To APMT1604NOTE: Non-Standard Size This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this

3 mm ballnose uncoated 4 mm shank 75 mm long pack of 2

Mars-Tech 3 mm ballnose uncoated 4 mm... ₹ 600.00

3 mm uncoated ballnose 4 mm shank 75 mm long pack of 2 pcs

32 mm AOMT18 cutter Indexable Inserted Endmill

Mars-Tech 32 mm AOMT18 cutter Indexab... ₹ 2,467.00

32 mm AOMT18 cutter Indexable Inserted Endmill Dia 32 Mm 3 Pocket Suitable For Mitsubishi InsertThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use AOMT184808 For Mitsubishi Brand Insert into this If any other brand has same insert it can also fixed to this.

Mars-Tech 32 MM Bull Nose in 25 mm Sh... from ₹ 1,444.00

32 MM Bull Nose in 25 mm Shank - 2 pocket suitable to RPMT1204 /R6EMRW-25-6R32-200L-2T , EMRW-C25-6R32-250L-2T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.

32 mm ccmt boring bar suitable to ccmt09/12 pack of 1

Mars-Tech 32 mm ccmt boring bar suita... ₹ 2,360.00

DIA 32 MM CCMT BORING BAR COMES WITH 2 INSERTS CCMT09T3 AND CCMT1204

32 mm Indexable Inserted Endmill APMT1604

Mars-Tech 32 mm Indexable Inserted En... from ₹ 1,444.00

32 mm Indexable Inserted Endmill Dia 32 mm 3 Pocket Suitable To APMT1604This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart BELOW IS A VIDEO FOR VIEW OF PRODUCT QUALITY AND BASIC DETAILS.