Mars-Tech

SDJCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDJCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 8,10,12 comes for DCMT070204 Dia 16,20,25 comes for DCMT11T304 Check Angle of boring bar also.

Mars-Tech SDMT1204 Milling Cutter Dia... ₹ 4,514.00

SDMT1204 WIDIA milling cutter body dia 100 6 pockets 32 mm hole. This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

SDMT1204 Milling Cutter DIA 50,63,80,100 suitable to Widia Insert M690 series pack of 1

Mars-Tech SDMT1204 Milling Cutter DIA... from ₹ 3,100.00

CUTTER WITH THROUGH COOLANT HOLES This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech SDMT1204 Milling Cutter dia... ₹ 3,033.00

SDMT1204 WIDIA milling cutter body dia 80 6 pockets 27 mm hole. This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

SDNCN - DCMT11T3 Turning Holder dcmt SDNCN pack of 1

Mars-Tech SDNCN - DCMT11T3 Turning Ho... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SDNCN 1616 M11 Suitable toDCMT11T3 Insert.

SDQCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDQCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 8,10,12 comes for DCMT070204 Dia 16,20,25,32 comes for DCMT11T304 Check Angle of boring bar also.

SDUCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDUCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 8,10,12,16 comes for DCMT070204 DIA 16 COMES IN BOTH DCMT070204 AND DCMT11T3Dia 16,20,25,32 comes for DCMT11T304 Check Angle of boring bar also.

SDZCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDZCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 10,12 comes for DCMT070204 Dia 16,20,25,32 comes for DCMT11T304 Check Angle of boring bar also.

Mars-Tech SK40/DIN69872 Pull Stud Wit... from ₹ 181.00

SK40/DIN69872 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Sold out

Mars-Tech SK50/DIN69872 Pull Stud Wit... ₹ 421.00

SK50/DIN69872 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Mars-Tech SKS06-50-22-5T CUTTER FOR W... ₹ 2,166.00

This cutter is suitable to WDMW06 High Feed Cutter , This is 50 mm suitable to WDMW06 Cutters , its has 5

Mars-Tech SOMT12T3 Indexable Cutter D... ₹ 2,407.00

SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Special T cutter HSS thickness 0.6 mm pack of 1

Mars-Tech Special T cutter HSS thickn... ₹ 749.00

This is special T cutter 0.6 mm thickness made of HSS shank size is 8 mm for technical dimensions please check 2nd image.

SRDCN 2020 RC0803 insert holder for turining radius pack of 1

Mars-Tech SRDCN 2020 RC0803 insert ho... ₹ 1,033.00

SRDCN is a Screw clamp holders in 2020 shank SCREW SIZE 3x8 its neutral tool

SRDCN 2020 RC1003 insert holder for turining radius pack of 1

Mars-Tech SRDCN 2020 RC1003 insert ho... ₹ 1,033.00

SRDCN is a Screw clamp holders in 2020 shank SCREW SIZE 4x8 its neutral tool

SRDCN 2525 RC1204 insert holder for turining radius pack of 1

Mars-Tech SRDCN 2525 RC1204 insert ho... ₹ 1,033.00

SRDCN is a Screw clamp holders in 2525 shank SCREW SIZE 4X10 its neutral tool

Step boring bar ccmt dia 8/12/16 pack of 1

Mars-Tech Step boring bar ccmt dia 8/... from ₹ 944.00

Step boring bar are also called reduce shank bar they have bigger size of shank for holding but machining part is reduce size 8 mm bar with 16 mm shank 10 mm bar with 16 mm shank 12 mm bar with 16 mm shank 16 mm bar with 20 mm shank

STFCL/R TCMT11 Boring Bar dia 10/12/16 pack of 1

Mars-Tech STFCL/R TCMT11 Boring Bar d... from ₹ 472.00

STFCL/R TCMT16 Boring Bar dia 16/20/25 pack of 1

Mars-Tech STFCL/R TCMT16 Boring Bar d... from ₹ 708.00

stunl boring bar TNMG16 Boring Bar dia 16/20 pack of 1

Mars-Tech stunl boring bar TNMG16 Bor... from ₹ 708.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree This is Screw clamp boring bar only. 3.5x12 mm screw will be used.