Mars-Tech

Mars-Tech 80 mm R8 cutter for RDKW160... ₹ 2,889.00

80 mm R8 cutter for RDKW1605 insert 5 pocket pack of 1EMR-8R-80-27-5T suitable to RDKW1605 /RDMW1605 MO ZCCCT or any other brand Insert SUITABLE SCREW M5X12 , SUITABLE KEY T20 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use RDMT1605 MO ZCCCT or any other brand Insert

Mars-Tech 80 mm SNMX1206 Insert Facem... ₹ 6,259.00

80 mm SNMX1206 Insert Facemill in 45 Degree And 88 Degree Suitable To KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50, 63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 80 mm SOMT12T3 Indexable Cu... ₹ 3,370.00

80 mm SOMT12T3 Indexable Cutter Dia 80 Mm Suitable To Mitsubishi InsertSOMT12T3 ASX400-050-A04R DIA 50 CUTTER BODY SUITABLE FOR MITSUBISHI SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this, If any other brand have same insert it can also fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech 8mm boring bar ccmt06 pack ... ₹ 531.00

8mm boring bar ccmt06 pack of 1CCMT BORING BAR ENTRY DIA IS 10 MM OF THIS BAR SHANK IS 8 MM SUITABLE TO CCMT0602 INSERT OF ANY BRAND LENGTH OF THIS BORING BAR - 125 MM SUITABLE SCREW 2.5X6 TORX KEY - T8

Mars-Tech ABT40 ER16A collet chuck 70... from ₹ 3,128.00

ABT40 ER16A collet chuck 70/100/150LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 ER20A collet chuck 70... ₹ 3,128.00

ABT40 ER20A collet chuck 70/100LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 ER25um collet chuck 7... from ₹ 3,128.00

ABT40 ER25um collet chuck 70/100/150LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 ER32um collet chuck 7... from ₹ 3,128.00

ABT40 ER32um collet chuck 70/100/150LABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases the Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Sold out

Mars-Tech ABT40 ER40um collet chuck 7... ₹ 3,128.00

ABT40 ER40um collet chuck 70/100ABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases the Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 fmb 22 50/100/150/200... from ₹ 2,887.00

ABT40 fmb 22 50/100/150/200 LongABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get a Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases the Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 fmb27 face mill holder ₹ 3,128.00

ABT40 fmb27 face mill holderABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 locking device Tool B... ₹ 2,347.00

ABT40 locking device Tool Boy , ABt40 fixture clamping fixture of ABT40 pack of 1ABT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

Mars-Tech ABT40 mt2 mt3 morse taper a... ₹ 3,128.00

ABT40 mt2 mt3 morse taper adaptorABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech ABT40 side lock holder 16/2... ₹ 3,128.00

ABT40 side lock holder 16/20/25/32/40ABT40 HOLDER CAN FIT INTO BBT40 CALIBARATED SPINDLE ONLY. ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech AJX09-50-22-5T JDMW09 Cutte... ₹ 2,166.00

AJX09-50-22-5T JDMW09 Cutter 50mm in 5 PocketsAJX09 is suitable to JDMW09 insert of any Brand will suit this cutter, this is a high feed insert cutter

Mars-Tech APKT11T3 16 MM Cutter 200 L... ₹ 1,444.00

APKT11T3 16 MM Cutter 200 Length suitable to ZCCCT apkt11t3 inserts pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use APKT11T3 For ZCCCT Brand Insert into this, If any other brand have same insert can also fix to this cutter body Kindly Take Care it's not for APMT1135 it's only for APKT11T3

APKT11T3 Indexable Milling Cutter For Dia 20

Mars-Tech APKT11T3 Cutter For Dia 20 ... ₹ 1,805.00

APKT11T3 Cutter For Dia 20 In 20 Mm Shank Size 200 Length Suitable To ZCCCT Brand InsertsThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APKT11T3 For ZCCCT Brand Insert into this, If any other brand have same insert can also fix to this cutter body Kindly Take Care it's not for APMT1135 it's only for APKT11T3

Mars-Tech APKT11T3 Indexable Milling ... ₹ 798.00

APKT11T3 Indexable Milling Cutter For Dia 18 In 16 Mm Shank Suitable To ZCCCT Brand InsertsThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use APKT11T3 For ZCCCT Brand Insert into this, If any other brand have same insert can also fix to this cutter body Kindly Take Care it's not for APMT1135 it's only for APKT11T3

Sold out

Mars-Tech APKT11T3 Indexable Milling ... ₹ 722.00

APKT11T3 Indexable Milling Cutter For Dia 20 In 19 Mm Shank Size 200 Length Suitable To ZCCCT Brand InsertsThis is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APKT11T3 For ZCCCT Brand Insert into this , If any other brand have same insert can also fix to this cutter body Kindly Take Care its not for APMT1135 its only for APKT11T3

APKT1705 cutter Indexable Inserted Endmill Dia 32 Mm Shank

Mars-Tech APKT1705 cutter Indexable I... ₹ 2,467.00

APKT1705 cutter Indexable Inserted Endmill Dia 32 Mm Shank 32 Mm 3 Pocket Suitable To APKT1705 For Taegu Tec InsertThis is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APKT1705 For Taegu Tec Brand Insert into this , If any other brand have same insert it can also fixed to this.