All

SPGT060204 CH T15 drilling insert for ss and steel grade pack of 10

Tabikut SPGT060204 CH T15 drilling ... ₹ 2,124.00

This SPGT insert is equivalent to SPMG this one is with chip breaker and better compatible with stainless steel This is multi-grade used for all kinds of material. SPMG060204 suitable to 15.5MM, 16MM, 16.5MM, 17MM, 17.5MM, 18MM, 18.5MM, 19MM, 19.5MM, 20MM, 20.5MM, 21MM, 21.5MM u drills LD 2, 3, 4, 5 Cutting speed Vc 150-220 m/min, feed 0.05-0.12, This is for the general purpose you need to make hit and trial suitable to your material.

Mars-Tech 50 mm SOMT12T3 Indexable Cu... ₹ 2,407.00

50 mm SOMT12T3 Indexable Cutter dia 50 mm suitable to Mitsubishi Insert pack of 1 SOMT12T3 ASX400-050-A04R DIA 50 CUTTER BODY SUITABLE FOR MITSUBISHI SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of size from other brands to fix this insert.

YL Keyless Drill Chuck 0.3-13m... ₹ 3,700.00

RANGE FROM 0.3 TO 13 MM HEAVY DUTY WITH YELLOW TITANIUM COATED JAWS. YL Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine Special Designed & manufactured against for super heavy torque use. Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm Spanner is optional not included with chuck.

APMT160430 T20 Carbide Insert 3 mm radius TABIKUT Insert apmt16

Tabikut APMT160430 T20 Carbide Inse... ₹ 2,360.00

3MM RADIUS INSERT WE SELL ORIGINAL INSERTS ONLY APMT160430 T20 grade T20 Grade is for general soft machining and Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604

63mm Apmt1135 other edge 75 degree insert cutter pack of 1

Mars-Tech 63mm Apmt1135 other edge 75... ₹ 2,070.00

63 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 63- 4 pocket cutter for APMT135 insert , facemill cutter 63 mm apmt1135 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

Tabikut 2 flute 8 mm cutter 45/55 h... ₹ 551.00

8 mm 2 flute endmill used for 60/75/100/150 mm long metal and wood

50 Mm Bull Cutter For Die And Mould | RPMT10T3

Mars-Tech 50 -R5-10T3 Mm Bull Cutter ... ₹ 1,505.00

FOR TECHNICAL DETAILS GO TO SECOND IMAGE OF PRODUCT EMRT-5R-50-22-4T SUITABLE TO R5 RPMT10T3 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT10T3/RPKT10T3/R5 OF mostly brand into this , please note this 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. also a picture to check both types.

STFCL/R TCMT11 Boring Bar dia 10/12/16 pack of 1

Mars-Tech STFCL/R TCMT11 Boring Bar d... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

Mars-Tech 63 mm snmx SNMX1206 Insert ... ₹ 5,686.00

63 mm snmx SNMX1206 Insert Facemill In 45 Degree And 88 Degree Suitable To KORLOY Brand SNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

SDMT120412 -1.2 mm corner radiusMR2500P widia carbide insert pack of 10

WIDIA SDMT120412 -1.2 mm corner r... ₹ 1,829.00

Widia Square Insert SDMT120412 MR2500P Original Insert Pack of 10. CORNER RADIUS - 1.2 MM We sell only Original Inserts.

Tabikut 1.5mm 3 flute endmill DLC c... ₹ 443.00

1.5mm 3 flute endmill DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. These DLC-coated endmills are for longer life on aluminum or sticky material machining. The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Mars-Tech WBMT06 10mm boring bar pac... from ₹ 826.00

WBGT060102 BORING BAR ENTRY DIA IS 6 MM OF THIS BAR SHANK IS 10 MM SUITABLE TO WBGT060102 INSERT OF ANY BRAND LENGTH OF THIS BORING BAR - 125 MM SUITABLE SCREW 2.2X6 TORX KEY - T6

CCGT060204 AK H01 Tabikut Aluminium Insert pack of 10

Tabikut CCGT060204 AK H01 Tabikut A... ₹ 1,180.00

Turning Tool, Turning Tool, 10pcs CCGT060204 AK H01 CCGT 060204 Carbide Inserts for Aluminum Cutting Tool CNC Lathe Machine Turning Tools AL +TIN Alloy wood All pictures shown are for illustration purpose only.Actual product may vary due to product Enhancement

Mars-Tech U Drill 40 mm from ₹ 4,720.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

Jaibros SK40 Er16 Collet Chuck Sk40... from ₹ 1,685.00

SK40 Tool Holder accepts all ER16 collets ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MM Rear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

WIDIA Widia TCMT110204 pa120 grad... ₹ 1,416.00

WIDIA ORIGINAL INSERT TCMT110204 Insert is most common boring operation insert used on TCMT boring bars or milling bars with TCMT pocket this is positive insert one side usage PA120 grade is for all general steel machining.

Deskar VNMG160408 TM LF9218 steel and stainless steel grade pack of 10

Deskar Deskar VNMG160408 TM LF9218... ₹ 1,746.00

DESKAR ORIGINAL INSERTS ONLY we sell only original inserts and grade descriptions for Deskar inserts are below 9218 double coated 9018 yellow coated

Mitsubishi RPMT10T3 MOE JS VP15TF pack of 10

Mitsubishi Mitsubishi RPMT10T3 MOE JS ... ₹ 2,006.00

Mitsubishi R5 insert RPMT10T3 original only.

16ER 14W External Threading Tabikut Carbide Insert pack of 10

Tabikut 16ER 14W External Threading... ₹ 2,537.00

This is External Threading Insert for turning machine 14W ISO standard threading. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.

Korloy VNMG12T308/04 X100 PC9030 grade pack of 10

Korloy Korloy VNMG12T308/04 X100 P... from ₹ 2,655.00

KORLOY ORIGINAL INSERTSKorloy PC9030 Grade is mainly suitable for stainless steel and also work on general steelThis Turning insert is for steel and stainless steel and its performance is amazing for finishing and roughing both purpose just try once and beat your current insert performanceVNMG12T3 is double side most economic insert for turning operation.