All

Mars-Tech Torx Screw 1.6X4mm Hp Pack ... ₹ 236.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

CBN CNGA120408 for HARDENED STEEL machining pack of 2 inserts

Tabikut CBN CNGA120408 for HARDENED... from ₹ 1,628.00

HARDENED STEEL MACHINING There are 2 types of CBN inserts 1 are for Hardened steel and another is for cast iron grey & chilled cast iron This is with 4 corners please choose carefully by application you need both grade are for continuous and interrupted cut

3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 3 mm Carbide ballnose 65 HR... from ₹ 585.00

3 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

10 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

Tabikut 10 mm Carbide Endmill 65 HR... from ₹ 2,655.00

10 mm Carbide Endmill 65 HRC 4 Flutes10X75/100 LONG PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

TABIKUT RPMT10T3 FM T50 grade Carbide Insert pack of 10

Tabikut TABIKUT RPMT10T3 FM T50 gra... ₹ 1,534.00

Carbide insert for specially stainless Steel general Steel machining with or without coolant , used in any suitable cutter for RPMT10T3 - thickness is 3.97 mm For steel , mild steel , hrc upto 45-55 with and without coolantRPMT10T3 -CUTTER BODY R5 bull cutter insert

WIDIA Widia SPKN1203 EDR THM pack... ₹ 1,475.00

SPKN Carbide Milling Insert 1203

MGMN T15H grade Grooving Insert 2/3/4 mm Suitable steel and stainless steel Pack Of 10

Tabikut MGMN T15H grade Grooving In... from ₹ 1,581.00

T15H GRADE Grooving Insert with 1.5/2/3/4/5 MM Width Kindly Check Size you need in Variation. MGMN comes in many brands but suitable to korloy grooving holder. its and ISO insert.

MWLNL/R WNMG0604 Turning Holder wnmg MWLNR/L pack of 1

Mars-Tech MWLNL/R WNMG0604 Turning Ho... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder MWLNR/L 2525 M06 Suitable toWNMG0603 Insert.

TNGG160402/4/8 R/L TN30 Cerment insert for finishing pack of 10

Tabikut TNGG160402/4/8 R/L TN30 Cer... ₹ 2,301.00

TABIKUT TN30 Cermet grade for turning alloy steels & stainless steels with high surface quality and long durable tool life due to high edge wear resistance and low coefficient of friction with economic price. ISO GRADE RANGE (P10-P20)(M10-M20)(K10-K20) 0.2 , 0.4 , 0.8 RADIUS IN RIGHT AND LEFT HAND

TNMG160404/08/12 md125 steel Tabikut grade (1box) pack of 10

Tabikut TNMG160404/08/12 md125 stee... ₹ 1,593.00

TNMG MD125 Grade is used for steel , forging and stainless steel TABIKUT ORIGINAL INSERT

Jaibros Wire Gauge Rectangular ₹ 235.00

Made from Polished Steel. Permanently deep etched graduations. Graduations in British and Metric systems. Gauges have a convenient decimal equivalents of each number. Popular Gauge for Gaging Iron Wire, Hot and Cold Rolled sheet Steel. Wire gauge is a measurement of how large a wire is, either in diameter or cross sectional area. Wire gauge is applicable to both electrical and non-electrical wires, being important to electrical wiring and to structural cable.

CBN TNGA160408 for HARDENED STEEL machining pack of 2 inserts

Tabikut CBN TNGA160408 for HARDENED... from ₹ 1,628.00

HARDENED STEEL MACHINING There are 2 types of CBN inserts 1 are for Hardened steel and another is for cast iron grey & chilled cast iron This is with 6 corners please choose carefully by application you need both grade are for continuous and interrupted cut

Mars-Tech BT40 CBK 6- 65/95/125/155/1... from ₹ 2,166.00

BT40 CBK 6- 65/95/125/155/185 Long pack of 1LBK also Called CBK is used for holding of SDJ EWN RBH kind of boring holders it has diffrent lengths to choose from variation balanced upto 12000 RPM

Mars-Tech BT40 CBK 4- 95/125/155/185 ... from ₹ 2,166.00

BT40 CBK 4- 95/125/155/185 Long pack of 1LBK also Called CBK is used for holding SDJ EWN RBH kind of boring holders it has different lengths to choose from variation balanced upto 12000 RPM

Mars-Tech Torx Key T9 high quality pack of 10

Mars-Tech Mars-Tech Torx Key T9 high ... ₹ 413.00

T9 hardened Torx key t-type style small size. This key can be used for the T9 size of screw most screws used for this size are rare it can be 3 mm or 2.5 mm Quantity 1 means 10 pcs

CCMT09T304/08 TM T60 Stainless Steel grade pack of 10

Tabikut CCMT09T304/08 TM T60 Stainl... ₹ 1,829.00

This GRADE is primary for Stainless Steel Grade finishing purpose , BM Chip breaker is mainly for Roughing and Finishing purpose , it can also work on general steel but its main use it for stainless steel grade.

TNMG1604/04/08/12 BF T60 Tabikut Stainless Steel Grade insert pack of 10

Tabikut TNMG1604/04/08/12 BF T60 Ta... ₹ 1,947.00

This insert is primiary for Stainless Steel Grade finishinig purpose , BF Chipbreaker is mainly for Finishing purpose , it can also work on general steel but its main use it for stainless steel grade.

Mars-Tech ABT40 side lock holder 16/2... ₹ 3,128.00

ABT40 side lock holder 16/20/25/32/40ABT40 HOLDER CAN FIT INTO BBT40 CALIBARATED SPINDLE ONLY. ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Mars-Tech DRILL CHUCK 7/16 THREAD SIZ... ₹ 700.00

THROW AWAY PRICE 7/16 THREAD SIZE KEYLESS DRILL CHUCK 1-13 HEAVY DUTY WITH YELLOW COATED JAWS. GIVING AT LOW PRICE BECAUSE OF THREAD SIZE IS NOT COMMON DEALS ARE NOT RETURNABLE AND EXCHANGABLE AT ANY CONDITION

Mars-Tech SDMT1204 Milling Cutter Dia... ₹ 4,514.00

SDMT1204 WIDIA milling cutter body dia 100 6 pockets 32 mm hole. This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.