All

sale

Carbide drill from 4 mm to 4.9 mm pack of 1 (1 piece as per size choosen )

HAGG MILL STORE PVT LTD Carbide drill from 4 mm to ... from ₹ 689.00 ₹ 1,459.00

Carbide Drills hrc 55 with h7 of tolerance.

Mars-Tech U Drill 29.5 mm from ₹ 3,481.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

16 mm Carbide Ballnose 55 HRC 2 Flutes ,Shank 16 MM Flute Length 40 Mm Total Length Is 100/150 Mm

Tabikut 16 mm Carbide Ballnose 55 H... from ₹ 3,446.00

16 mm Carbide Ballnose 55 HRC 2 Flutes, Shank 16 MM Flute Length 40 Mm Total Length Is 100/150 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.

TaeguTec TaeguTec CCMT060204/08 mt t... ₹ 1,794.00

TAEGUTEC ORIGINAL INSERTS TT5100 is a universal grade used for most steel machining. CCMT is a positive insert used for turning purpose or boring purpose

Torx Screw 6 MM T25 High Precision( Pack Of 10 Pcs )

Mars-Tech Torx Screw 6 MM T25 High Pr... ₹ 236.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech 12 mm u drill LD3 suitable ... ₹ 2,360.00

12 mm u drill LD3 suitable to SOMT040202 insert12 MM U DRILL LXD-3 - 36 MM DRILLING CAPACITY U Drills can be used directly on the surface without a center hole, parameters mentioned on the leaf inside the box, small size u drills are not common and the suitable insert is also small please read 2nd sheet to understand product usability.

Kyocera Tnmg160404/08 hq tn60 turning insert cermet grade pack of 10

Kyocera Kyocera Tnmg160404/08 hq tn... ₹ 2,183.00

KYOCERA ORIGINAL INSERTS This grade is used for all general steel and forging for finishing purpose this is an original product.TN60 Grade is cermet grade can be used on many kind of material but you can use this on forging steel/steel/ for finishing purposeTNMG insert is a turning insert with multiple edges used on both sides.

WDMW080520ZTR High Feed Insert Cutter Body

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 1,926.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Jaibros SK40 Er 25 Collet Chuck Sk4... from ₹ 1,685.00

SK40 Tool Holder accepts all ER25 collets ER25 Collets range from 1 mm to 16 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

Kyocera TNMG160404/8 MS PR1125 Pack of 10

Kyocera Kyocera TNMG160404/8 MS PR1... ₹ 2,242.00

WE SELL ONLY ORIGINAL INSERTS TNMG Is most common turning insert used for turning application PR1125 Grade is for Stainless Steel ,M10-M30

EWN53-95 mm range fine boring head pack of 1

Mars-Tech EWN53-95 mm range fine bori... from ₹ 1,600.00

EWN53-95 fine boring head has a range of 53 mm to 75 mm if you put its cartridge you can increase the boring range with same head 5-2 - 70 TO 93 MM Inclusive 5-3 - 89 TO 112 MM inclusive Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)

Jaibros Radius gauge ring type 0.75... ₹ 412.00

The blades used are of the concave and convex shape Quantity of Leaves : 18.0 Handy device for checking radius of tools and dies easier and faster Each leaf is clearly stamped with the radius size A radius gauge, also known as a fillet gauge, is a tool used to measure the radius of an object. The gauge is placed against the edge to be checked and any light leakage between the blade and edge indicates a mismatch that requires correction. Radius gauges require a bright light behind the object to be measured.

WNMG080408 specially stainless steel TABIKUTcarbide insert (1box) pack of 10

Tabikut WNMG080408 specially stainl... ₹ 1,947.00

This is best suitable to STAINLESS STEEL GRADE INSERTS it can be used on steel but on ss its far better life.

Tabikut 2 mm 4 flute Ballnose 55 hr... ₹ 236.00

4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 2mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter

Yuzuki Dial Gauge ₹ 1,572.00

Material: Stainless Steel Color: White Product Dimension (L x B x H): 5 cm x 5 cm x 5 cm Package Contents: 1 Dial Gauge Country of Origin ‏ : ‎ India Included Components: Dial Gauge Brand Name: Yuzuki™

SDJ 25-47 mm boring head for finish boring range pack of 1

Mars-Tech SDJ 25-47 mm boring head f... ₹ 14,804.00

SDJ Boring head are finishing cum roughing heads and can work directy after u drill operation. kindly check details size for more details Suitable holding for this is LBK2

6 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 6 mm Carbide ballnose 65 HR... from ₹ 966.00

6 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

NBH2084 (10 micron graduation) boring head bt40 pack of 1 kit

Mars-Tech NBH2084 (10 micron graduati... ₹ 25,276.00

SEE SECOND IMAGE FOR ALL TECHINCAL DETAILS 10 Micron Graduation This is Fine boring this can bore from 8 mm to 280 mm with different depth BT40 taper

TaeguTec CCMT060204 fg tt5100 grade pack of 10

TaeguTec TaeguTec CCMT060204 fg tt51... ₹ 1,864.00

TAEGUTEC ORIGINAL INSERTS TT5100 is a universal grade used for most steel machining. CCMT is a positive insert used for turning purpose or boring purpose

GRIP Micro Boring Bars Bca 29-38... ₹ 4,801.00

Micro Boring Bars Are Used for Finishing Purpose .20 microns per division radially Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately