All

Mars-Tech ISO40 holder Morse Taper Sh... from ₹ 2,076.00

Morse taper holders are used for drills with taper shank kinldy choose Female taper shank as per your male taper shank size.

WIDIA SPKN1504 edr wu20pm grade pack of 10

WIDIA WIDIA SPKN1504 edr wu20pm g... ₹ 2,773.00

SPKN Milling Square used steel and stainless steel.

Micro Endmill 0.9 Mm 4mm Shank 2 Flutes (60 HRC)

Tabikut Micro Endmill 0.9 Mm 4mm Sh... ₹ 561.00

Micro Endmill 0.9 mm with 2 Flutes and 4 mm Shank 1.8 mm Flute Length HRC60

Mars-Tech U Drill 22.5 mm from ₹ 2,655.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Special T cutter HSS thickness 0.6 mm pack of 1

Mars-Tech Special T cutter HSS thickn... ₹ 749.00

This is special T cutter 0.6 mm thickness made of HSS shank size is 8 mm for technical dimensions please check 2nd image.

TNMG1604/04/08/12 BM T60 Tabikut Stainless Steel Grade insert pack of 10

Tabikut TNMG1604/04/08/12 BM T60 Ta... ₹ 1,947.00

This insert is primiary for Stainless Steel Grade finishinig purpose , BM Chipbreaker is mainly for Medium cut Finishing purpose , it can also work on general steel but its main use it for stainless steel grade.

Jaibros Edge finder set of 5 pieces... ₹ 1,062.00

This is set of 5 pieces 3 are single end and 2 are double end Single End size in inches .500"/.500" , .500"/.200" , Cone Single End 3/8"xcone Double End in Cone - 1/2" and 3/8" Hardened, ground and lapped to close tolerances for diameter and concentrically Helps to quickly locate working edges, shoulders, grooves, center points and scribe lines. 5 Piece Edge Finder Set Hardened Steel Made of Tool Steel- Body and contacts both. Hardened, ground and lapped to close tolerances for diameter and concentrically Cone Double End 1/2" x 3/8" Single End cone 3/8" , Single End cylendrical 1/2"x1/2" and 1/2" x.200" Helps to quickly locate working edges, shoulders, grooves, center points and scribe lines. A great time saving tool

Tabikut RDMX12T3 MOT T20 R6 insert ... ₹ 1,180.00

RDMX/RDMT12T3 insert is milling insert 1 box contain 10 pcs of insert Screw used for this 3.5 mm

12MM 25 mm flute length 75 long pack of 8

Tabikut 12MM 25 mm flute length 75 ... ₹ 3,988.00

Throw away price for 423 rs. each 12MM 2 FLUTE UNCOATED 25 MM FLUTE LENGTH TOTAL LENGTH IS 75 MM , DEALS ARE NOT EXCHANGEABLE OR RETURNABLE AT ANY CONDITON

BT40ER32-100L-15000RPM BALANCED pack of 1

DEALS BT40ER32-100L-15000RPM BALA... ₹ 1,000.00

BT40 ER32-100L - 1 PC ALL OK JUST SELLING BECAUSE OF DIFFERENT BRAND. DEALS ARE NOT RETURNABLE OR EXCHANGEABLE

Mars-Tech BT40 CBK 1- 85/115 Long pac... from ₹ 2,166.00

BT40 CBK 1- 85/115 Long pack of 1LBK also Called CBK is used for holding of SDJ EWN RBH kind of boring holders it has diffrent lengths to choose from variation balanced upto 12000 RPM

16,18,20 MM UNCOATED endmills in 4 flutes pack of 1

Tabikut 16,18,20 MM UNCOATED endmil... from ₹ 3,200.00

ONE TIME QUANTITY TO SELL OUT UNCOATED IN 4 FLUTES

Kyocera Kyocera DNMG150608 MS PR112... ₹ 4,248.00

WE SELL ONLY ORIGINAL INSERTS DNMG150608 Is most commonly TURNING insert PR1125 Grade is for Stainless Steel ,M10-M30

Mars-Tech High Feed Cutter Dia 80 Mm ... ₹ 5,416.00

ASRF12-80-27-6T , ASRF12-63-22-4T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1205 Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

DCMT070204 HQ TN30 Cermet insert pack of 10

Tabikut DCMT070204 HQ TN30 Cermet i... ₹ 1,416.00

TN30 Cermet grade for Steel & Stainless Steel MachiningGeneral purpose cermet with superior wear resistance and toughness for steel and stainless steel finishing.Tabikut is known as a leading manufacturer of cermets. Cermet is a composite material combining Ceramic and Metal. Typical materials used in cermets are TiC, TiN, TiCN and NbC. Designed to provide long tool life and excellent surface finishes, cermets combine toughness with superior wear resistance."Great for finishing applications ISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL

EWN68-150 mm range fine boring head pack of 1

Mars-Tech EWN68-150 mm range fine bor... from ₹ 1,600.00

EWN68-150 fine boring head has a range of 68 mm to 100 mm if you put its cartridge you can increase the boring range with same head 6-2 - 94 TO 125 MM Inclusive 6-3 - 118 TO 150 MM inclusive Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)

CBN TNGA160408 for HARDENED STEEL & CASTI IRON machining pack of 1 inserts

Tabikut CBN TNGA160408 for HARDENED... ₹ 1,180.00

CBN inserts for Hardened steel AND cast iron both This is with 6 corners smooth and interrupted cut

R5 Insert tabikut RPMT10T3 T15H pack of 10

Tabikut R5 Insert tabikut RPMT10T3 ... ₹ 1,168.00

Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for EMRW5R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPKT10T3 insert. For steel , mild steel , hrc upto 45-55 with and without coolantR5 for EMRW5R-CUTTER BODYSUITABLE TO ALL MILLING CUTTER FOR R510T3 RPKT10T3 RPMT10T3

DCMT070204 FG CT1500 Cermet insert pack of 10

Tabikut DCMT070204 FG CT1500 Cermet... ₹ 1,770.00

CT1500 UNCOATED Cermet grade for turning, grooving & parting of alloy steels & stainless steels with high surface quality and long tool life due to high wear resistance and low coefficient of frictionISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL

Corner Radius Endmill 2 mm in 0.5 mm radius pack of 1

Tabikut Corner Radius Endmill 2 mm ... ₹ 295.00

A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr or using in some finishing operation most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.