All

Mars-Tech 200 mm APMT16 cutter ₹ 13,541.00

200 mm cutter suitable to APMT1604 60 mm flange type hole with 4 pcd holes

TCMT16T304/08 DM125 Tabikut insert PACK OF 10

Tabikut TCMT16T304/08 DM125 Tabikut... ₹ 2,006.00

TCMT16T304/08 CARBIDE INSERTS. 1 Box Contain 10 inserts. Multi Grade used for all type of machining.

TNMG160408 tk4559 Left hand knife edge pack of 10 pcs

Tabikut TNMG160408 tk4559 Left hand... ₹ 1,369.00

TNMG160408 LS TK 4559 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

TaeguTec TNMG160404 ML K10 grade pack of 10

TaeguTec TaeguTec TNMG160404 ML K10 ... ₹ 2,124.00

TAEGUTEC ORIGINAL INSERTS ml k10 grade is Negative 60° Triangular inserts for medium light application of stainless steel, steel and aluminum TNMG is double sided insert

WS PCD MGMN grooving PCD insert in... ₹ 1,156.00

WS BRAND PCD inserts are used for mirror finish on aluminium. MGMN can suit on KORLOY HOLDER This box has 2 inserts

11IR 1.5 ISO Internal Threading Tabikut Carbide Insert pack of 10

11IR 1.5 ISO Internal Threading Tabikut Carbide

Tabikut 11IR 1.5 ISO Internal Threa... ₹ 2,537.00

This is Internal Threading Insert for turning machine 1.5 ISO standard threading. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.

Mars-Tech 25mm aomt184808 2 Pocket Mi... ₹ 1,866.00

25mm aomt184808 2 Pocket Mitsubishi Insert pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use AOMT184808 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Tabikut 2.5 mm 3 flute endmill DLC ... ₹ 443.00

3 Flute Carbide Endmills are used for non ferrous material and soft material like aluminum , brass , copper , silver and gold. This DLC coated endmills are for longer life on aluminum or sticky material machining. Advantage of DLC coating is it reduce the friction and make the chip evacuation more smooth and better surface quality The large core diameter is more stable Negative rake angel design enhance rigidity of the tool TF25 carbide rod for soft material.

DCGT11T304 AK H01 aluminum machining pack of 10

Tabikut DCGT11T304 AK H01 aluminum ... ₹ 1,298.00

This insert is suitable to non ferrous material only like Aluminum , brass , gold , silver select the radius as per the requirement.

SVQBL vbmt1604 holder 2525/2020 shank pack of 1

Mars-Tech SVQBL vbmt1604 holder 2525/... ₹ 1,033.00

SCREW CLAMP HOLDERS SCREW SIZE 4X10 Turning Holder SVQB/L 2525 M16 Suitable to VBMT1604 Insert. Black Color , High Quality , Left Hand. Suitable Insert VBMT1604 Try Tabikut Brand Turning Insert. Screw set remain same for right left 2020 shank 2525 shank

CBN CCGW060204 for HARDENED STEEL machining pack of 2 inserts

Tabikut CBN CCGW060204 for HARDENED... ₹ 2,183.00

HARDENED STEEL MACHINING There are 2 types of CBN inserts 1 are for Hardened steel and another is for cast iron grey & chilled cast iron This is with 2 corners please choose carefully by application you need both grade are for continuous and interrupted cut

CBN CNGA120408 for cast iron machining pack of 2 inserts

Tabikut CBN CNGA120408 for cast iro... from ₹ 1,628.00

CAST IRON MACHINING There are 2 types of CBN inserts 1 are for Hardened steel and another is for cast iron grey & chilled cast iron This is with 4 corners please choose carefully by application you need both grade are for continuous and interrupted cut

Mars-Tech ABT40 fmb27 face mill holder ₹ 3,128.00

ABT40 fmb27 face mill holderABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Tabikut APKT11T308 PM carbide inser... ₹ 1,652.00

APKT11T308 PM carbide insert pack of 10APKT11T308 is equivalent to the ZCCCT carbide insert and can fit into the same cutter for this. this is for general purpose steel grade and can be used on stainless steel corner radius is 0.8 mm

Mars-Tech U Drill 33.5 mm from ₹ 3,953.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Mars-Tech U Drill 30.5mm from ₹ 3,599.00

Mars-Tech U Drill 25.5 mm from ₹ 3,009.00

CRM VNMG12T308 CF CP2430 steel and ss grade pack of 10

CRM CRM VNMG12T308 CF CP2430 st... ₹ 1,888.00

CRM ORIGINAL INSERTSCRM 2430 Grade is mainly suitable for steel and also work on Stainless steel , alloy steel , forged This Turning insert is for steel and stainless steel and its performance is amazing for finishing and roughing both purpose just try once and beat your current insert performanceVNMG12T3 is double side most economic insert for turning operation.

Doilf PCD insert TNGA160402/04/08 pack of 2

Doilf Doilf PCD insert TNGA160402... ₹ 1,652.00

PCD inserts are used for mirror finish on aluminium. This box has 2 inserts

Yuzuki Digital Thickness Gauge ( 1... ₹ 6,294.00

Material: plastic Size (L x B x H): 17 cms x 17 cms x 7 cms Volume: 0.4 Litres Item Package Quantity: 1 Brand Name: Yuzuki Color: Black Included Components: Digital Thickness Gauge, Battery Item Weight: 450 grams