All

Tabikut CALIPERS AND FIRM JOINT PAC... from ₹ 150.00

CALIPERS IN SALES BECAUSE OF SOME ARE VERY LITTLE RUST AND DISCONTINUED FROM SELLING PRODUCT ACCURACY AND QUALITY IS OK DEALS ARE NOT RETURNABLE AND EXCHANGABLE AT ANY CONDITION

Taegutec TDC2mm groovingk10 1 box pack of 10

TaeguTec Taegutec TDC2mm groovingk10... ₹ 6,667.00

We sell only ORIGINAL products. This is 2 mm grooving insert K10 Grade is for all Cast iron , Non ferrous materials

QCMT10T304 TK4515 Multifunction tool's insert pack of 10

Tabikut QCMT10T304 TK4515 Multifunc... ₹ 4,000.00

QCMT10T304 TK4515 is steel , stainless steel and cast iron grade this insert is only used for multifunction single flute indexable drill please choose this insert for 20 mm Drill size only .

SPGT050204 CH T15 drilling insert for ss and steel grade pack of 10

Tabikut SPGT050204 CH T15 drilling ... ₹ 1,888.00

This SPGT insert is equivalent to SPMG this one is with chip breaker and better compatible with stainless steel SPGT 050204 suitable to Indexable U drills 13MM,13.5MM,14MM,14.5MM,15 mm mostly Cutting speed Vc 150-220 m/min , feed 0.05-0.12 copper Coated for Versatile usage. this is stainless steel grade , can be used on other material like steel ,cast iron etc.

Tabikut 6mm Shank 2.5 mm Ballnose I... ₹ 425.00

6mm Shank 2.5 mm Ballnose In 2 Flutes (45HRC)Carbide BALLNOSE 2 FLUTES 45 HRC Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

WIDIA CNMG120408 WK15CT Cast iron grade pack of 10

WIDIA WIDIA CNMG120408 WK15CT Cas... ₹ 2,218.00

WE SELL ONLY ORIGINAL INSERTS WIDIA WK20CT GRADE IS CAST IRON GRADE AND CAN ALSO WORK ON NON FERROUS MATERIAL

6mm Shank 1 mm ballnose 4 Flute 55 HRC Tabikut pack of 1

Tabikut 6mm Shank 1 mm ballnose 4 F... ₹ 543.00

4 flute 6 mm Shank 1 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 1 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 12 mm Uncoated endmill pack... from ₹ 1,250.00

2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining. The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Tabikut 10 mm Uncoated endmill pack... from ₹ 1,100.00

2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining. The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

3 mm unocated endmill 3/4 mm shank pack of 2

Tabikut 3 mm unocated endmill 3/4 m... from ₹ 295.00

2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining. The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

CCMT060204 MT CT1500 Cermet insert pack of 10

Tabikut CCMT060204 MT CT1500 Cermet... ₹ 1,652.00

CT1500 UNCOATED Cermet grade for turning, grooving & parting of alloy steels & stainless steels with high surface quality and long tool life due to high wear resistance and low coefficient of frictionISO Range - P/M/K (P10-P20)(M10-M20)(K10-K20)IGrade or Coating Type CERMETCoating Layers CermetGrade Color METAL

7 MM 2 flute cutter in 8 mm shank 55 hrc pack of 1

Tabikut 7 MM 2 flute cutter in 8 mm... from ₹ 416.00

metal and wood ,plastic sheet , less hardened material

Mars-Tech EOC25 NUT pack of 1 ₹ 950.00

EOC25 nut can only be used with EOC 25 collet NUT WITH BEARING DEALS ARE NOT EXCHANGEABLE NOR RETURNABLE

EWN100-203 mm range fine boring head pack of 1

Mars-Tech EWN100-203 mm range fine bo... from ₹ 1,900.00

EWN100-203 fine boring head has a range of 100 mm to 153 mm if you put its cartridge you can increase the boring range with same head 6-2 - 126 TO 179 MM Inclusive 6-3 - 150 TO 203 MM inclusive Suitable insert is TCMT/TCGT 1102 Size (Inserts are bought separately)

EWN32-60 mm range fine boring head pack of 1

Mars-Tech EWN32-60 mm range fine bori... from ₹ 1,062.00

EWN32-60 fine boring head has a range of 32 mm to 45 mm if you put its cartridge you can increase the boring range with same head 3-2 - 41 TO 51 MM Inclusive 3-3 - 50 TO 60MM inclusive Suitable insert is TPGH/X 0802 Size (Inserts are bought separately)

Kyocera Kyocera VNMG160408 MS PR112... ₹ 3,658.00

WE SELL ONLY ORIGINAL INSERTS VNMG Is most common turning insert used for turning application PR1125 Grade is for Stainless Steel ,M10-M30

2mmx75mm long Carbide Endmill 55 HRC PACK OF 1

Tabikut 2mmx75mm long Carbide Endmi... ₹ 350.00

Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc. ,Plastic Packaging for non breakable packing

-22% sale

Yuzuki Outside Micrometer, 25-50 m... ₹ 2,148.00 ₹ 2,733.00

Brand Name: Yuzuki™Colour: SilverItem Weight: 450 gramsMaterial: stainless_steelModel Number: MIC2550WNumber of Items: 1Part Number: MIC2550WManufacturer Series Number: MIC2550WIncluded Components: Micrometer, Setting RodSize: 20 cm x 10 cm x 5 cm

11IR 2.00 ISO Internal Threading CRM Carbide Insert pack of 10

CRM 11IR 2.00 ISO Internal Thre... ₹ 2,242.00

This is Internal Threading Insert for turning machine 2.00 ISO standard threading. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.

RPMT1204 MO T15 TABIKUT Get one Cutter Body 50 mm Free- Pack of 100 Pcs Inserts

Tabikut RPMT1204 MO T15 TABIKUT Get... ₹ 10,030.00

REGULAR PRICE IS 10030 WITHOUT CUTTER BODY ONLY 5 DEALS AVAILABLE Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for EMRW6R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPMT1204 insert.For steel , mild steel , hrc upto 45-55 with and without coolantR6 for EMRW6R-CUTTER BODYcoatedSUITABLE TO ALL MILLING CUTTER FOR R61204

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality