All

Mars-Tech ABT40 fmb27 face mill holder ₹ 3,128.00

ABT40 fmb27 face mill holderABT40 HOLDER CAN FIT INTO BBT40 CALIBRATED SPINDLE ONLY. ABT40 Holder Taper and Both Faces Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life Collet Chuck Holder Is Balanced to G6.3-12000 Rpm

Tabikut APKT11T308 PM carbide inser... ₹ 1,652.00

APKT11T308 PM carbide insert pack of 10APKT11T308 is equivalent to the ZCCCT carbide insert and can fit into the same cutter for this. this is for general purpose steel grade and can be used on stainless steel corner radius is 0.8 mm

Mars-Tech U Drill 33.5 mm from ₹ 3,953.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Mars-Tech U Drill 30.5mm from ₹ 3,599.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Mars-Tech U Drill 25.5 mm from ₹ 3,009.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

CRM VNMG12T308 CF CP2430 steel and ss grade pack of 10

CRM CRM VNMG12T308 CF CP2430 st... ₹ 1,888.00

CRM ORIGINAL INSERTSCRM 2430 Grade is mainly suitable for steel and also work on Stainless steel , alloy steel , forged This Turning insert is for steel and stainless steel and its performance is amazing for finishing and roughing both purpose just try once and beat your current insert performanceVNMG12T3 is double side most economic insert for turning operation.

Doilf PCD insert TNGA160402/04/08 pack of 2

Doilf Doilf PCD insert TNGA160402... ₹ 1,652.00

PCD inserts are used for mirror finish on aluminium. This box has 2 inserts

Yuzuki Digital Thickness Gauge ( 1... ₹ 6,294.00

Material: plastic Size (L x B x H): 17 cms x 17 cms x 7 cms Volume: 0.4 Litres Item Package Quantity: 1 Brand Name: Yuzuki Color: Black Included Components: Digital Thickness Gauge, Battery Item Weight: 450 grams

Mars-Tech U Drill 33mm from ₹ 3,894.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Tabikut TCGT16T304 AKH01 uncoated insert PACK OF 10

Tabikut Tabikut TCGT16T304 AKH01 un... ₹ 1,829.00

TABIKUT ORIGINAL INSERTS AK H01 grade is uncoated used for aluminum machining only.

Jaibros Sk40 Er20 Collet Chuck Sk40... from ₹ 1,685.00

SK40 Tool Holder accepts all ER20 collets ER20 Collets range from 1 mm to 14 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100mm,150mm,200mmRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

Mars-Tech Fine Boring Bar 300-410 mm ... ₹ 25,230.00

Fine boring bar for bigger hole range Suitable Insert is TCMT1102 (insert not included) Weight of the bar is 3.9 Kg ( holder not included)Boring bar minimum length is 117 mm Suitable holder is BST Type

Mars-Tech Fine Boring Bar 200-310 mm ... ₹ 22,790.00

Fine boring bar for bigger hole range Suitable Insert is TCMT1102 (insert not included) Weight of the bar is 3.1 Kg ( holder not included)Boring bar minimum length is 117 mm Suitable holder is BST Type

Tabikut uncoated ballnose deals from ₹ 590.00

THROW AWAY PRICE . uncoated ballnose are used on non ferrous material DEALS ARE NOT RETURNABLE AND EXCHANGABLE AT ANY CONDITION

Mars-Tech WNMU08 Cutter Dia 100 mm Pa... ₹ 8,260.00

100 mm -7 pocket - M5 screw T20 torx key size. This cutter is suitable to any brand of WNMU08 -8 Pocket 90 Degree High Feed Cutter.

Tabikut 1 MM 2 flute cutter 45/55 h... ₹ 246.00

1 mm 2 flute endmill used for 50 metal and wood ,plastic sheet , less hardened material

Tabikut CALIPERS AND FIRM JOINT PAC... from ₹ 150.00

CALIPERS IN SALES BECAUSE OF SOME ARE VERY LITTLE RUST AND DISCONTINUED FROM SELLING PRODUCT ACCURACY AND QUALITY IS OK DEALS ARE NOT RETURNABLE AND EXCHANGABLE AT ANY CONDITION

Taegutec TDC2mm groovingk10 1 box pack of 10

TaeguTec Taegutec TDC2mm groovingk10... ₹ 6,667.00

We sell only ORIGINAL products. This is 2 mm grooving insert K10 Grade is for all Cast iron , Non ferrous materials

QCMT10T304 TK4515 Multifunction tool's insert pack of 10

Tabikut QCMT10T304 TK4515 Multifunc... ₹ 4,000.00

QCMT10T304 TK4515 is steel , stainless steel and cast iron grade this insert is only used for multifunction single flute indexable drill please choose this insert for 20 mm Drill size only .

SPGT050204 CH T15 drilling insert for ss and steel grade pack of 10

Tabikut SPGT050204 CH T15 drilling ... ₹ 1,888.00

This SPGT insert is equivalent to SPMG this one is with chip breaker and better compatible with stainless steel SPGT 050204 suitable to Indexable U drills 13MM,13.5MM,14MM,14.5MM,15 mm mostly Cutting speed Vc 150-220 m/min , feed 0.05-0.12 copper Coated for Versatile usage. this is stainless steel grade , can be used on other material like steel ,cast iron etc.

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality