All

Mars-Tech 80 mm SNMX1206 Insert Facem... ₹ 6,259.00

80 mm SNMX1206 Insert Facemill in 45 Degree And 88 Degree Suitable To KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50, 63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Doilf pcd insert CCGW060202/04/08 pack of 2

Doilf Doilf pcd insert CCGW060202... ₹ 1,204.00

PCD inserts are used for mirror finish on aluminium. This box has 2 inserts

1.75 ISO External Threading carbide insert

16ER/IR 1.75 ISO External/Internal Threading Insert pack of 10

Tabikut 16ER/IR 1.75 ISO External/I... ₹ 2,537.00

SELECT EXTERNAL AND INTERNAL CAREFULLY.. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.

RDKW1204 insert for Wood cutting and Low hardness material pack of 10

WoodCut RDKW1204 insert for Wood cu... ₹ 590.00

Carbide insert for wood,brass , aluminium machining with or without coolant , used in any suitable cutter for EMRW6R and this is used in milling machine mainly. Suitable cutter any cutter which suits R6 insert. For wood,brass ,aluminum,gold, low hardness material , hrc upto 30-40 with and without coolantR6 for EMRW6R-CUTTER BODYSUITABLE TO ALL MILLING CUTTER FOR R61204

Mars-Tech R290 Milling Cutter of Dia ... from ₹ 1,866.00

Indexable Cutter suitable to R290 Milling insert 12T3 with 4 edges and square. R290 is a sandvik brand insert any other brand with similar size will also fit to this.

SDMT09T312 DM YBG202 zccct insert pack of 10

ZCCCT SDMT09T312 DM YBG202 zccct ... ₹ 2,537.00

SDMT09T312 DM YBG202 New Grade for steel and stainless steel Its a universal grade for most of machining material.

Jaibros Edge Finder and Center Find... ₹ 755.00

4 PC Edge & Center Finder ; Time saving positing tool for jig borers, milling and other machines Shank Diameter: 3/8", 1/2" ; Hardened and ground on all working surfaces Locates edge quickly-shoulders, grooves, center points and scribed line .200 & .375 tip w/wiggler & Centering point Quantity: 1 (4 PCS) ; Weight: 7 ounce ; Case INCLUDED 4 PC Edge & Center Finder-one double end type 3/8" shank .200 & .375 tip w/wiggler & centering point-one single end type 1/2" shank .200 tip-one single end type 3/8" shank with centering point-one single end type 1/2" shank with centering pointAll parts are hardened and center less ground to precision tolerance

6mm Shank 3 mm ballnose 4 Flute 55 HRC Tabikut pack of 1

Tabikut 6mm Shank 3 mm ballnose 4 F... ₹ 543.00

4 flute 6 mm Shank 3 mm ballnose 55 HRC Tabikut pack of 1Carbide Ballnose-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

GRIP Micro Boring Bars Bca 38- 4... ₹ 5,091.00

Micro Boring Bars Are Used for Finishing Purpose.20 microns per division radially Please Check Boring Bar Range and Suitable Length for Your JobCartridge and Insert Not Included Order It Seprately

MGMN grooving insert LDA Deskar grooving insert pack of 10

Deskar MGMN grooving insert LDA De... from ₹ 1,010.00

Grooving Insert with Width Kindly Check Size you need in Variation. MGMN comes in many brands but suitable to korloy grooving holder. its and ISO insert.

CCMT09T308 t20 grade TABIKUT Carbide Insert For Steel

Tabikut CCMT09T308 t20 grade TABIKU... ₹ 12,980.00

CCMT09t308 Steel & stainless steel Grade Used in boring bar for boring application Double Coated for heat resistant.

3 mm cutter in 3 mm shank pack of 20 pcs

Tabikut 3 mm cutter in 3 mm shank p... ₹ 1,534.00

THROW AWAY PRICE unit cost 65 rs each 3MM 4 FLUTE 45 HRC PURPLE COATED CUTTER CAN BE USED ON STEEL , SS CI AND NON FERROUS. DEALS ARE NOT RETURNABLE AND EXCHANGABLE AT ANY CONDITION

16 mm Internal grooving bar with 2,3,4 mm tdc insert pack of 1

Elevate Tools 16 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 22 MM Internal Grooving bar has different sizes this is suitable to TDC,TDT,TDJ,TDX Suitable to Taegutec Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

Mars-Tech AJX09-50-22-5T JDMW09 Cutte... ₹ 2,166.00

AJX09-50-22-5T JDMW09 Cutter 50mm in 5 PocketsAJX09 is suitable to JDMW09 insert of any Brand will suit this cutter, this is a high feed insert cutter

Mars-Tech WDMW06T320 High Feed insert... ₹ 1,805.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

CBN TNGA160408 for HARDENED STEEL machining pack of 1 inserts

Tabikut CBN TNGA160408 for HARDENED... ₹ 885.00

CBN inserts for Hardened steel This is with 6 corners smooth and interrupted cut

Jaibros Center Gauge 60 Degree Inch... ₹ 235.00

Used to check thread angle and pitch of thread cutting tools. / Use to grind and position thread cutting tool on a lathe 60 degree angle, tempered with a satin-chrome finish Extremely handy for use in grinding and setting screw cutting tools / Hardened with lapped edges and notches Very useful for finding number of threads per inch through graduations in 1/14" and 1/20" of an inch on center gauge Ground gauging surfaces. Center gauge with inch graduations

CBN WNGA080408 for cast iron machining pack of 2 inserts

Tabikut CBN WNGA080408 for cast iro... from ₹ 1,628.00

CAST IRON MACHINING There are 2 types of CBN inserts 1 are for Hardened steel and another is for cast iron grey & chilled cast iron This is with 6 corners please choose carefully by application you need both grade are for continuous and interrupted cut

16 ER/IR AG55 External/Internal Threading CRM carbide Insert pack of 10

CRM 16 ER/IR AG55 External/Inte... ₹ 2,242.00

16 ER/IR AG55 External/Internal Threading CRM carbide Insert pack of 10 SELECT EXTERNAL OR INTERNAL CAREFULLY. CRM EXTERNAL HAS A YELLOW BOX AND INTERNAL HAS A BLUE BOX TPI RANGE 8-48 ( MM 0.5-3.0) 55-degree Partial Profile This is Internal Threading Insert for turning machine AG55 standard threading. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade, stainless steel grade Prevents chip curling, thus less tool breakage.

Tabikut APMT1135 xm T20 Get 1 16mm Cutter Body Free -Pack Of 100

Tabikut Tabikut APMT1135 xm T20 Ge... ₹ 9,912.00

Tabikut Regular Price 850 If you buy 100 Nos. We Give you 1 Cutter Body Of 16 MM 150 Long Free with This.. This is special deal only 5 deals are available.